Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

UNS N06625 and UNS N06852 Nickel-Chromium-Molybdenum-Columbium Alloys Tube

Nickel-Chromium-Molybdenum-Columbium Alloys

(UNS N06625 and UNS N06852) and Nickel-Chromium-

Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

UNS N06625, INCONEL 625, GH3625, GH3625, GH625, NS336, NS3306, NC22DNb, W.Nr.2.4856/ NiCr22Mo9Nb, NA21, etc

Excellent mechanical properties at both extremely low and extremely high temperatures.

Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.

Almost complete freedom from chloride induced stress corrosion cracking.

High resistance to oxidation at elevated temperatures up to 1050C.

Good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer.

List price： 200.00

Price： 190.00

Nickel-Chromium-Molybdenum-Columbium Alloys

(UNS N06625 and UNS N06852) and Nickel-Chromium-

Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

UNS N06625, INCONEL 625, GH3625, GH3625, GH625, NS336, NS3306, NC22DNb, W.Nr.2.4856/ NiCr22Mo9Nb, NA21, etc

Excellent mechanical properties at both extremely low and extremely high temperatures.

Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.

Almost complete freedom from chloride induced stress corrosion cracking.

High resistance to oxidation at elevated temperatures up to 1050C.

Good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer.

INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength,excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures

range from cryogenic to 1800°F (982°C). Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion.

UNS N06625 products are furnished in two grades of different heat-treated conditions:

Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C).

Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F(593°C) when resistance to creep and rupture is required. Alloys UNS N06219 and UNS N06852 are supplied in the solution annealed condition only.